INSTRUCTION FOR USE - cylinder-regulators.com CHECK IT OUT close
Home » Product Search
HEATING TORCH LOMAT

ACCESSORIES: the piezoelectronic ignition torch can be revolved in the shank in 360 degrees (step 60°) auxiliary foldup stand USE:for isolating jobs. Art. Nr. Type(∅) Consum.PB (g/h) Output (kW) Length (mm) Pipe(mm) 19877 60 mm 7600 97,28 530 500 19885 60 mm 9800 125,40 790 750 19893 60 mm 9800 125,40 940 900   TECHNICAL DATA Working pressure: 1,5 - 4,0 bar Gas:

LOMEN TORCH SPOT

For Lomen shank art. nr. 25767. Bent 40°. Art. Nr. Diameter Gas consumption Capacity 562 5 mm 0,120 kg/h 1, 54 kw/h 570 7 mm 0,200 kg/h 2, 58 kw/h          

WEIMAR 18 (KOMBI 18)

SHANK   Art. Nr. Description 0763489 Wurzen (WEIMAR 18) G0767631 KOMBI 18 WELDING ATTACHMENT Art. Nr. Welding range (mm) 14085180 0,5 – 1 14085181 1 – 2 14085182 2 – 4 14085183 4 – 6 14085184 6 – 9 14085185 9 – 14 14085056 14 – 20 14085057 20 – 30 WELDING ATTACHMENT FLEXIBLE Art. Nr. Length (mm)

SMD 500 2-STAGE, 6.0 200 BAR

Compact Dual-stage gas supply panel for non-corrosive  gases and mixtures up to grade 6.0.  For the connection of 1 cylinder with a maximum filling pressure of 200 bar. Diaphragm type regulator and isolation valve. Independent of inlet pressure due to dual-stage set-up For wall mounting or gas cylinder cabinet mounting For inert, reactive, flammable and oxidizing gases and gas mixtures Excellent and accurate Pressure control Desi

ADJUSTMENT VALVES

Art. Nr. Application Connection (EN 560) 14056015 Cutting oxygen G 3/8" 14056016 Heating oxygen G 1/4" 14056017 Fuel gas G 3/8"LH 203010607P Oxygen UNF 9/16" 203010609P Fuel gas UNF 9/16" LH

HF300/301-4 SERIES - HIGH FLOW PRESSURE REGULATOR

316L SS Wetted Parts Balanced Main Valve Cv 4.0 Diaphragm or Piston Sensed Range of O Rings None rising stem Low torque adjustment Threaded or Flanged Options

XHS-300 SERIES - DIAPHRAGM SENSED PRESSURE REGULATOR WITH SINGLE 100W HEATER

An economical heated regulator available in ‘side entry’ or ‘in-line’ heat transfer options to maintain sample gases in their vapour state. The ‘in-line’ design maximizes the heat transfer area via a unique spiral machined heater sheath, which mixes the gas and ensures efficient heat transfer. The ‘side entry’ design can be used in applications where heat transfer is less critical, and where install

LF-230 SERIES - LOW FLOW PRESSURE REGULATOR

FEATURES 316L SS Machined Wetted Parts Large sensitive elastomeric diaphragm 0,1 bar to 10 bar / 1,5 psi to 150 psi control range Minimal decaying inlet pressure effect For flow rates to 30Nm³/hr (@ max P2)

BP-301 SERIES - BACK PRESSURE REGULATOR

The BP-301 incorporates a highly sensitive piston to control pressures up to 70 bar with the lower Cv value of 0.1, and 35 bar with a higher Cv of 0.5. Both designs provide accurate back pressure control on liquid or gas applications. Unlike relief valves, the set load from the spring is not directly applied to the seating area, and the piston sensor provides accurate control throughout the control range. FEATURES Lightweight compact design

TS-300 SERIES - TWO STAGE PRESSURE REDUCING REGULATOR

The TS-300 provides stable pressure control under decaying cylinder pressures. The first stage of the regulator is set to 35 bar to allow maximum flow capability through the regulator. SPECIAL FEATURES Metal to metal sealing diaphragm Sealing area protected and centralized within the body of the regulator 0,04 % decaying pressure effect ‘Interstage’ relief valve option

Live Chat