The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded ½” NPT outlet port. FEATURES 690 bar/10000 psi inlet pressure Metal to metal seating for liquid and PEEK seating for Gas Precision machined sensing elements 3 Sensor ranges for combination of low torque a

Certified to ATEX directive 94/9/EC, the XHR-300 helps to maintain saturated gases in their vapourised state due to its unique DUAL heating design. Two 100 W heater cartridges, or steam tubes, are inserted in spiral machined sheaths, which agitate the media to help with the heat transfer and analysis process. The propriety PCB is easy to wire and incorporates an adjustable potentiometer to adjust the temperature setting to the heaters. FEATURES

Based on the same design features of the LF-690 Hydraulic Regulator, the LF-692 incorporates a PEEK seat for use on high pressure gases, using a range of precision machined sensing elements to provide control of pressure to 690 bar. The regulator is self relieving with segregated captured vent to allow vented gases to be piped away to a safe area. The seating area can easily be accessed from the base of the regulator for speedy servicing in situ.

A compact and economical high pressure regulator with precision machined sensing elements to allow fine pressure control on pressures up to 414 bar, which can be supplied as none venting or self venting (none adjustable). FEATURES 550 bar / 8000 psi inlet pressure Economical Design Precision machined sensing elements Load bearings and large handwheel for low torque adjustment Excellent sensitivity Self venting and non venting options

The MF-101 incorporates a large precision machined sensing element to control outlet pressures up to 35 bar from a maximum 100 bar inlet. The main valve is an unbalanced design to create positive shut off on gas or liquid applications against the PEEK seat. Lightweight compact design Piston sensing element High accuracy

Device which enables to connect humidifier to the combi valve.

Art. Nr. Application Connection (EN 560) 14056015 Cutting oxygen G 3/8" 14056016 Heating oxygen G 1/4" 14056017 Fuel gas G 3/8"LH 203010607P Oxygen UNF 9/16" 203010609P Fuel gas UNF 9/16" LH

IDEAL FOR:Zincwork, roofing, tinplate work. TECHNICAL DATA Chemical composition (%) Sn:33 Pb:67 Melting range: 183 - 243° C SOLID RODS Art. Nr. Description Pcs/pack Qt. B135202K GAZETAIN B 33 Rod 5 1 kg STRIPS Art. Nr. Description Pcs/pack Qt. B135206K GAZETAIN B 33 Strip 2 2 kg * To be used in combination with Flux GAZETAIN PLUS. 1 strip = 1,1 kg  

Art. Nr. Description 14078200 1 aluminium torch6 or 8 welding attachments 0,5-14 (30) mm1 spring cutting lever attachment4 AC cutting nozzles (up to 100 mm)1 guide1 circle cutting attachment1 set of cleaning nozzles1 mounting wrenchsteel case G14078202 1 aluminium torch5 welding attachments 0,5-9 mm1 spring cutting lever attachment4 AC cutting nozzles (up to 100 mm)1 guidesteel case 14078204 1 aluminium torch5 weldin

COMPLETE SETS GCE offer a wide range of complete X11 sets for various applications. They are all special designed to make it easy for the user to select what’s needed for the work to be done. The equipment is packed in robust boxes for good protection and easy transportation. Art. no. Shank Cutting attachment Welding attachment Nozzles Other equipment 0764265 X11 K G G1/4 + G1/4LH X11 P 190 ACE 90° L 2A 160l, 3A 315