GCE Medical products now found on gce-medical.com EXPLORE NOW close
Accueil » Rechercher un produit
DUOLINE - DÉDOUBLEURS DE PRISES

DUOLINE R - MONTAGE AU TAIL 30 × 10 MM Code Désignation K007246 Duoline R - Oxygène K007245 Duoline R - Vide K007247 Duoline R - Air médical DUOLINE P - MONTAGE SUR PRISE MURALE Code Désignation K007267 Duoline P - Oxygène K007269 Duoline P - Vide K007268 Duoline P - Air médical

PRESSURE WATCH DN20

The Pressure Watch has the same shut off function as an ordinary Emergency Shut-Off Valve Box. Behind the plexiglass you can find quick couplings and gauges. The quick couplings are used to connect spare cylinders with regulators and emergency supply hoses.QC are available in following national standards: SS, DIN, CZ, NIST, ...To inform the hospital staff regarding gas failures the Pressure Watch is equipped with sensors for one of the follo

DIAPHRAGM REGULATING VALVES MVR-A 500 G

The regulating valve MVR-A 500 has a very good regulating characteristic and is very finely adjustable both by greater as also by lesser flow rate values. APPLICATION As a system component in and low pressure areas. As accessory for cylinder and point-of-use regulators for fine adjustment of the gas flow. As system element in apparatus and analytical equipment. Very fine gas flow adjustment Wide flow rate range for high and low pressure app

RD 05 - RELEASE SECURITY SYSTEM

Because some fluid in a network can be dangerous, GCE has developped an efficient security device that will act on the flow when the outlet pressure will be very high or very low. The GCE security device is used only with selected regulators of the range. The security valve cut the inlet gas flow, if the outlet pressure is out of the pressure slot that has been previously adjusted. TECHNICAL DATA Spring pressure slot:   &nbs

LINE PRESSURE REGULATORS LMD 320-01/-03/-04/-05

A broad application spectrum through the 4-port configuration (type -01/-04) or 6-Port-configuration (type -03/-05), which can be delivered respectivly, with (type -04/-05) or without (type -01/-03) a relief valve. With type-03 and type-05 the use of contact gauge (accessories) in conjunction with alarm box (accessories) facilitates the monitoring of gas reserves. APPLICATION The LMD 320 reduces line pressure to give a lower supply pressure. Th

GAS SUPPLY PANELS SMD 320-16/-24/-25

These gas supply panels are mounted onto a stainless steel panel and consist of a pressure regulator, inlet and outlet pressure gauges, a relief valve and shut-off valves (type -16 at the outlet, type -24 at the inlet, type -25 at inlet and outlet) for the process gas. A choice of stainless steel coils or flexible high pressure hoses is available for the connection to the gas cylinder. The use of contact gauge (accessories) in conjunction with al

GAS SUPPLY MANIFOLDS BMD 320-39

Pressure decreases in the active cylinder (or bundle) below a preset level which causes a semi-automatic switch to switch over to the full cylinder. This is achieved by two integrated pressure regulators (preset to slightly different delivery pressure levels), connected at their outlet ports. Moving the lever towards the full bank allows for the disconnection and replacement of empty cylinders without interruption to the gas flow. The use of con

GAS SUPPLY MANIFOLDS BMD 322-39

Pressure decreases in the active cylinder (or bundle) below a preset hand wheel which causes a semi-automatic switch to switch over to the full cylinder. This is achieved by two integrated pressure regulators (preset to slightly different delivery pressure levels), connected at their outlet ports. Rotation by hand wheel with the arrow to direction of full bank allows for the disconnection and replacement of empty cylinders without interruption to

RTP regulator

Art.Nr. Type Inlet pressure Outlet pressure Nominal flow rate 548900060704P RTP 21 1-8 bar 30 mbar 1,5 kg/h 548900060707P RTP 3 1-8 bar 30 mbar 3,0 kg/h 548900060708P RTP 4 1-8 bar 50 mbar 3,0 kg/h Inlet connection: W21,8x1/14"LHOutlet connection: hose nipple Ø 8 mm      

MEDIUNIT SS TYPE

Whole medical range is available on gcehealthcare.com Medical terminal units provide a quick and easy connection of hospital ward gas equipment to the hospital gas source. The type of medical gas outlets are decided by national standards in each country and sometimes from local requests in each hospital. GCE complies with ISO 7396 and national installation standards with secure products where every product is fully tested in production. Our Medi

Live Chat