Применение: запасная часть для паяльника тип LOMAT. Арт.No Расход газа, г/ч Мощность кВт Длина мм Вес кг. 18879 40 0,5 210 0,260 ТЕХНИЧЕСКИЕ ДАННЫЕ Рабочее давление: 1,0 - 2,0 бар Газ: П, ПБ

(ПЕРЧАТКИ) Пятипалые защитные перчатки сделана из свинного спилка. EN 420 EN 388 (2 1 1 1) Dexterity Уровень 4 Арт № Описание Размер Кол-во G100313 Перчатки спилковые 10 12

  Редукторы и регуляторы Редукторы Регуляторы BASECONTROL®  BASECONTROL® DIN BASECONTROL® SE, BE BASECONTROL® FLOW

The Pressure Watch has the same shut off function as an ordinary Emergency Shut-Off Valve Box. Behind the plexiglass you can find quick couplings and gauges. The quick couplings are used to connect spare cylinders with regulators and emergency supply hoses.QC are available in following national standards: SS, DIN, CZ, NIST, ...To inform the hospital staff regarding gas failures the Pressure Watch is equipped with sensors for one of the follo

The regulating valve MVR-A 500 has a very good regulating characteristic and is very finely adjustable both by greater as also by lesser flow rate values. APPLICATION As a system component in and low pressure areas. As accessory for cylinder and point-of-use regulators for fine adjustment of the gas flow. As system element in apparatus and analytical equipment. Very fine gas flow adjustment Wide flow rate range for high and low pressure app

A broad application spectrum through the 4-port configuration (type -01/-04) or 6-Port-configuration (type -03/-05), which can be delivered respectivly, with (type -04/-05) or without (type -01/-03) a relief valve. With type-03 and type-05 the use of contact gauge (accessories) in conjunction with alarm box (accessories) facilitates the monitoring of gas reserves. APPLICATION The LMD 320 reduces line pressure to give a lower supply pressure. Th

These gas supply panels are mounted onto a stainless steel panel and consist of a pressure regulator, inlet and outlet pressure gauges, a relief valve and shut-off valves (type -16 at the outlet, type -24 at the inlet, type -25 at inlet and outlet) for the process gas. A choice of stainless steel coils or flexible high pressure hoses is available for the connection to the gas cylinder. The use of contact gauge (accessories) in conjunction with al

Pressure decreases in the active cylinder (or bundle) below a preset level which causes a semi-automatic switch to switch over to the full cylinder. This is achieved by two integrated pressure regulators (preset to slightly different delivery pressure levels), connected at their outlet ports. Moving the lever towards the full bank allows for the disconnection and replacement of empty cylinders without interruption to the gas flow. The use of con

Pressure decreases in the active cylinder (or bundle) below a preset hand wheel which causes a semi-automatic switch to switch over to the full cylinder. This is achieved by two integrated pressure regulators (preset to slightly different delivery pressure levels), connected at their outlet ports. Rotation by hand wheel with the arrow to direction of full bank allows for the disconnection and replacement of empty cylinders without interruption to

Art.Nr. Type Inlet pressure Outlet pressure Nominal flow rate 548900060704P RTP 21 1-8 bar 30 mbar 1,5 kg/h 548900060707P RTP 3 1-8 bar 30 mbar 3,0 kg/h 548900060708P RTP 4 1-8 bar 50 mbar 3,0 kg/h Inlet connection: W21,8x1/14"LHOutlet connection: hose nipple Ø 8 mm