CUTTING NOZZLE PSD, HIGH SPEEDGroup Number: 2551
PSD is high speed machine cutting nozzle to be used with cutting torch BIR+™. Nozzle is desiged for propane, natural gas and mixed fuel gases. Both cutting and heating nozzles are chrome plated. The package of cutting nozzles contains 5 pieces, heating nozzle 1 piece.
|Art. Nr.||Type||Cutting range (mm)|
|14001227||Cutting nozzle||3 - 6|
|14001228||Cutting nozzle||7 - 15|
|14001229||Cutting nozzle||15 - 25|
|14001230||Cutting nozzle||25 - 40|
|14001231||Cutting nozzle||40 - 60|
|14001232||Cutting nozzle||60 - 100|
|14001250*||Cutting nozzle||100 - 150|
|14001233||Cutting nozzle||100 - 200|
|14001234||Cutting nozzle||200 - 250|
|14001235||Cutting nozzle||250 - 300|
|14001236||Heating nozzle||3 - 100|
|14001237||Heating nozzle||100 - 300|
*Cutting nozzle 14001250 preferable for hole piercing. Please use it only together with heating nozzle 14001236 !
GENERAL CONDITIONS FOR HIGH QUALITY AND EFFICIENT CUTTING
GCE machine cutting nozzles are designed to reach the cuts of quality level 1 according to EN ISO 9013. It is possible to reach maximal cutting speed by setting-up recommended cutting parameters of particular nozzles shown below, cutting of straight cuts, by using of clean metal sheet surface, oxygen with purity 99,5 % or better. Correct values of gases pressures are to be measured at the torch inlet. Parameters are prepared for mild steel with maximal carbon content of 0,25 %. Quality cutting machine with proper gas supply system, original GCE cutting equipment and new, undamaged, original cutting and heating nozzles are to be applied.
Download Technical Datasheets