GAS MANIFOLD MC150 - STABILIZERGroup Number: 3611
MC150 - STABILIZER is a second stage pressure reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units.
MC150 - STABILIZER is only second stage reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MC80, MM90 or liquid oxygen tank (LOX)). In case of signal for pressure deviation in relation to the alarm settings, the alarm can easily be displayed on a Gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with either pressure transmitter 4-20 mA, pressure transmitter 0-50 mV or with contact gauge.
Gas reduction unit MC150 - STABILIZER must always be installed in compliance with the standards EN ISO 7396-1 and the appropriate national standards.
MC150 STABILIZER INCLUDES THE FOLLOWING COMPONENTS:
- MC150 Stabilizer Manifold
FOR A COMPLETE MC150 STABILIZER MANIFOLD ADD
- Alarm unit (included if ordered together with HP unit)
|325397706||MC150 STAB||O2||Manual activation||Contact gauge|
|325397707||MC150 STAB||O2, Air, N2||Manual activation||4–20 mA|
|Gases:||O2, Air, N2, N2O, CO2, (all medical gases)|
|Nominal flow:||360 m3/h|
|Inlet maximal pressure:||20 bar (2000 kPa)|
|Outlet nominal pressure:||4,5 bar (setting range 0,5–6 bar)|
|Inlet connection:||2× G1 1/2"F + soldering piece pipe ∅ 35 mm|
|Outlet connection:||2× G1 1/2"F + soldering piece pipe ∅ 35 mm|
|Pressure relieve valve:||6,8 bar|
|Pressure relieve valve
|∅ 35 mm|
Complies with Medical Devices Directive 93/42/EEC
Complies with EN 60601-1-2
present SIS HB 370 and HTM 02-01
Download Technical Datasheets