ECO SAVER REGULATOR
Group Number: 2141The ECOSAVER is a cylinder regulator designed for use in gas shielded welding processes to reduce pressure and flow surges which could otherwise create gas wastage and give rise to a poor weld. Weld quality and gas consumption are optimised when the ECOSAVER is used as part of the control system, and especially beneficial during non continuous welding process application.
FEATURES
- Cylinder regulator with up to 300 bar inlet pressure and integrated flow meter
- Adjustable in the range 0-30 litres per minute
- Two stage pressure reduction from 300 bar
- Saves gas during inlet pressure changes (as the cylinder empties)
- Saves gas during fl ow changes (non-continuous welding processes)
- Provides consistent and stable gas conditions around the weld
- Available with connections for most markets
The ECOSAVER keeps a constant level of gas pressure in the downstream system during the welding process. This prevents pressure and flow surges from being created in the system. Surges can create gas wastage and give rise to a poor weld. Weld quality and gas consumption are optimised when the ECOSAVER is used as part of the control system.
GAS SAVINGS
Shielding Gas is a significant consumable cost in the welding process, and savings with ECOSAVER can also be very significant. The type of welding determines the savings, highest benefits during spot welding, (significant on/off cycling at the gas supply). However valuable reduction in costs can still be achieved even on longer seam runs. Typical expected savings.
| Type of Weld | Gas saving |
| Spot welding: | 40-45% |
| Mostly spot welding plus some seam welding: | 30-35% |
| Equal spot/seam: | 25-30% |
| Mostly seam welding: | 18-22% |
TECHNICAL DATA
ECOSAVER FOR UK
| Inlet pressure: | 300 bar |
| Flow rate: | 3 - 30 l/min |
ECOSAVER FOR OTHER COUNTRIES
| Inlet pressure: | 200 bar |
| Flow rate: | 3 - 30 l/min |
735100000380_ECO_SAVER_16012014.pdf 
