PROPANE Art. Nr. Width (mm) Length (mm) 14014230 50 360 14014146 100 370 ACETYLENE Art. Nr. Width (mm) Length (mm) 14014196 250 440 14014195 100 470 14014194 150 470 14014193 200 1117 14014192 250 1117
Whole medical range is available on gcehealthcare.com MediConnect is a new generation of flexible hoses for gas supply, intended for use with respiratory, anaesthetic and emergency equipment. Resistant to abrasion and change of colour Latex and phthalate free Containing antistatic inner layer Colour coding of ISO 5359 (obtionally neutral coding) Wide range of country specific connections Lengths of hoses from 0,5 to 5 m; to be specifie
Whole medical range is available on gcehealthcare.com Medical high pressure hoses are used to connect cylinders or cylinder bundles to gas supply systems. The high pressure hose is intended to be used with a pressure up to maximum 230 bar. Pressure tested at 345 bar. The hose is equipped with a safety wire. HANDLING The high pressure hose shall be transported, stored, installed and maintained according to Instruction of Use. Maximum life time
Whole medical range is available on gcehealthcare.com The dimensions and colours of our polyvinyl chloride manufactured, textile-reinforced hoses are in accordance with the current hospital standard Maximum working pressure 14 bar The hoses for medical breathing oxygen and nitrous oxide are marked with the chemical denomination of the gas The medical breathing air hose is marked "Air" Warranty time 2 years Hose system brochure EN
TROLLEYS WITH 5 WHEELS Art. Nr. Description 14090630 Trolley for 10l cylinder - static 14090636 Trolley for 10l cylinder - antistatic TROLLEYS WITHOUT BELT Art. Nr. Description 325396136P Trolley for 10 or 20l cylinder 325396137 Trolley for 10, 20l cylinders, 3×10l or 2×20l (Dimensions H×W×D: 935×426×352 mm) 500009601 Trolley for 2,5 and 5l cylinder AC
Designed with precision machined sensing elements to allow fine pressure control on pressures up to 414 bar. Two piston sensors combined with two spring ranges, provide 4 outlet control options with a combination of low torque adjustment and excellent sensitivity. A self venting design and optional ratio loaded actuator makes it an ideal regulator for use with electro-pneumatic controllers for automated pressure control. FEATURES 690 bar / 10
The humidifier for oxygen therapy is a device allowing an increase in the relative humidity in the oxygen supplied to the patient; this gas for medical use normally lacks a sufficient humidity grade to be physiologically tolerated.The jar is made of polycarbonate, or polysulphone the cap with inlet adaptor of polypropylene and inlet connection of polypropylene + coated brass. Art. Nr. Description Inlet connection K294402 MEDIWET 13
Whole medical range is available on gcehealthcare.com Mediflow® II 50 lpm is a flow selector intended for use for resuscitation and for CPAP. Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas Lateral and frontal reading of flow setting Enables to get up to 50 lpm for supplying machines (not for use
To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipework system.The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping.B
Based on the proven heat transfer design of the XHR-300, the XHR-301 allows greater outlet pressures to 150 barvia its piston sensed element. FEATURES ATEX certified to EEx d IIC T3 Dual, independent, 100 W heaters for pre heat and re-heat of sample gas 316SS Piston sensed element for low torque adjustment and high pressure control Large surface area for heat transfer Easy to wire circuit board with 115 V or 230 V supply Stylish Junction
